VAGSport Braided Brake Lines Mk8 Golf R
VAGSport’s reinforced braided brake hoses represent unrivalled quality in the world of high-performance braking. All our hoses are tested to extremes in both the laboratory, and on the racetrack where they’ve proven themselves time and time again.
Each VAGSport kit is assembled using premium grade precision machined stainless steel fittings. These fittings are then swaged directly to hard drawn high tensile stainless braided hose and the hose is finished off in our smooth carbon outer shield. The smooth translucent finish gives a quality OEM+ look while still allowing the exquisite weave of the stainless braid inside to be seen. This means the kits look and last as well as they perform.
Why are braided brake lines so important?
Upgrading is essential to any performance driver as it eliminates the potential ‘spongy’ feeling often found with stock rubber hoses under harsh braking conditions, this sponginess is due largely to the materials used as the rubber hose can expand under pressure especially when hot this means all the pressure from the driver’s effort is not fully transferred to the brake calipers. Upgrading to VAGSport braided brake lines eliminates the expansion giving a more direct feed. The result is better braking and better feedback and less brake fade when pushing hard on track or in spirited driving.All our kits have been designed as direct-fit replacement for the OEM setup. Unlike other kits, we even include replacement crush washers and banjo bolts (where required) so other than bleeding the braking system you will not need anything else to upgrade from your stock hoses to these.
What’s Included
- Front, rear, or a full set of carbon style stainless steel braided brake lines (Select an option)
- Natural plain stainless steel banjo bolts (if the fittings require them)
- Copper crush washers (if the fittings require them)
Compatibility
- Mk8 Golf R
Brake Line Specifications
| Line inner material | PTFE |
| Line outer material | Stainless steel (303/304) and protective PVC cover |
| Fittings material | Stainless steel (303/304) |
| Temperature range | -70°C to 260°C (-94°F to 500°F) |
| Inside diameter | 3.5mm (0.138″) |
| Outside diameter | 7.5mm (0.295″) |
| Maximum working pressure | 290 Bar (4206 PSI) |
| Burst pressure | 870 Bar (12618 PSI) |
| Minimum bend radius | 38mm (1.496″) |
VAGSport Braided Brake Lines Mk8 Golf R
VAGSport’s reinforced braided brake hoses represent unrivalled quality in the world of high-performance braking. All our hoses are tested to extremes in both the laboratory, and on the racetrack where they’ve proven themselves time and time again.
Each VAGSport kit is assembled using premium grade precision machined stainless steel fittings. These fittings are then swaged directly to hard drawn high tensile stainless braided hose and the hose is finished off in our smooth carbon outer shield. The smooth translucent finish gives a quality OEM+ look while still allowing the exquisite weave of the stainless braid inside to be seen. This means the kits look and last as well as they perform.
Why are braided brake lines so important?
Upgrading is essential to any performance driver as it eliminates the potential ‘spongy’ feeling often found with stock rubber hoses under harsh braking conditions, this sponginess is due largely to the materials used as the rubber hose can expand under pressure especially when hot this means all the pressure from the driver’s effort is not fully transferred to the brake calipers. Upgrading to VAGSport braided brake lines eliminates the expansion giving a more direct feed. The result is better braking and better feedback and less brake fade when pushing hard on track or in spirited driving.All our kits have been designed as direct-fit replacement for the OEM setup. Unlike other kits, we even include replacement crush washers and banjo bolts (where required) so other than bleeding the braking system you will not need anything else to upgrade from your stock hoses to these.
What’s Included
- Front, rear, or a full set of carbon style stainless steel braided brake lines (Select an option)
- Natural plain stainless steel banjo bolts (if the fittings require them)
- Copper crush washers (if the fittings require them)
Compatibility
- Mk8 Golf R
Brake Line Specifications
| Line inner material | PTFE |
| Line outer material | Stainless steel (303/304) and protective PVC cover |
| Fittings material | Stainless steel (303/304) |
| Temperature range | -70°C to 260°C (-94°F to 500°F) |
| Inside diameter | 3.5mm (0.138″) |
| Outside diameter | 7.5mm (0.295″) |
| Maximum working pressure | 290 Bar (4206 PSI) |
| Burst pressure | 870 Bar (12618 PSI) |
| Minimum bend radius | 38mm (1.496″) |
If you need to ask a question, or simply want to know if this product fits your car, please contact us.
We would love to help!
If you need to ask a question, or simply want to know if this product fits your car, please contact us.
We would love to help!
Sign up to our rewards program, and receive 10 points, for every £1 spent here at Diversion Automotive.
Sign up to our rewards program, and receive 10 points, for every £1 spent here at Diversion Automotive.
Please see our Shipping Policy for information.
Please see our Shipping Policy for information.
To get the most out of your product, it is important to know how to care for it.
Interior parts must be cared for with non-abrasive interior cleaners.
Exterior components should be cared for with PH neutral, non abrasive cleaning products.
Our team are most happy to assist if you have any questions about the care of your product.
To get the most out of your product, it is important to know how to care for it.
Interior parts must be cared for with non-abrasive interior cleaners.
Exterior components should be cared for with PH neutral, non abrasive cleaning products.
Our team are most happy to assist if you have any questions about the care of your product.
For more information, please see our product warranty page.
For more information, please see our product warranty page.
