Raise the level of style on your Volkswagen MK7.5 GTI or MK7.5 Golf R with the ECS Tuning Carbon Fiber Rear Bumper Flares. This quality addition was engineered and designed in-house to fit directly to your factory rear bumper cover, with no modifications required and are 100% compatible with P.D.C. sensors.
These were designed to provide the vehicle with a more aggressive look by accentuating the area around the bumper corners and reflector housings, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.
PART DESIGN
-
The ECS Tuning Carbon Fiber Rear Bumper Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability
-
Applies directly to the rear bumper cover using the pre-applied adhesive tape to accentuate the area around the fog lights, providing a similar, aggressive look to the R400 concept car
-
Dramatically improves the appearance of the rear end and adds a wide, aggressive stance from rear and side of vehicle
-
Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team
PRODUCT DEVELOPMENT
-
Our ECS Carbon Fiber Rear Bumper Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.
INSTALLATION AND SUPPORT
-
Installation is very simple and non-permanent. Simply clean the impacted area with an alcohol wipe or similar cleaner, and apply the Flares directly to the rear bumper cover using the pre-applied adhesive tape.
** All other products shown in installed photography are NOT included... This kit is for QTY 2 rear bumper flares ONLY! **
*2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*
Raise the level of style on your Volkswagen MK7.5 GTI or MK7.5 Golf R with the ECS Tuning Carbon Fiber Rear Bumper Flares. This quality addition was engineered and designed in-house to fit directly to your factory rear bumper cover, with no modifications required and are 100% compatible with P.D.C. sensors.
These were designed to provide the vehicle with a more aggressive look by accentuating the area around the bumper corners and reflector housings, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.
PART DESIGN
-
The ECS Tuning Carbon Fiber Rear Bumper Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability
-
Applies directly to the rear bumper cover using the pre-applied adhesive tape to accentuate the area around the fog lights, providing a similar, aggressive look to the R400 concept car
-
Dramatically improves the appearance of the rear end and adds a wide, aggressive stance from rear and side of vehicle
-
Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team
PRODUCT DEVELOPMENT
-
Our ECS Carbon Fiber Rear Bumper Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.
INSTALLATION AND SUPPORT
-
Installation is very simple and non-permanent. Simply clean the impacted area with an alcohol wipe or similar cleaner, and apply the Flares directly to the rear bumper cover using the pre-applied adhesive tape.
** All other products shown in installed photography are NOT included... This kit is for QTY 2 rear bumper flares ONLY! **
*2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*
If you need to ask a question, or simply want to know if this product fits your car, please contact us.
We would love to help!
If you need to ask a question, or simply want to know if this product fits your car, please contact us.
We would love to help!
Sign up to our rewards program, and receive 10 points, for every £1 spent here at Diversion Automotive.
Sign up to our rewards program, and receive 10 points, for every £1 spent here at Diversion Automotive.
Please see our Shipping Policy for information.
Please see our Shipping Policy for information.
To get the most out of your product, it is important to know how to care for it.
Interior parts must be cared for with non-abrasive interior cleaners.
Exterior components should be cared for with PH neutral, non abrasive cleaning products.
Our team are most happy to assist if you have any questions about the care of your product.
To get the most out of your product, it is important to know how to care for it.
Interior parts must be cared for with non-abrasive interior cleaners.
Exterior components should be cared for with PH neutral, non abrasive cleaning products.
Our team are most happy to assist if you have any questions about the care of your product.
For more information, please see our product warranty page.
For more information, please see our product warranty page.
