Skip to content

Revo Audi S1 332 x 28 BBK Replacement Discs – RA831B100400

Write a review
£802.16

Revo Audi S1 332 x 28 BBK Replacement Discs

The Audi S1 Revo disc upgrade is designed to directly replace the stock discs and comes complete and ready to fit with left and right-handed. Saving 1.2 Kg each side the disc not only weighs less than the OEM part but also features much larger, more efficient cooling veins individually designed for each side of the vehicle to ensure even braking performance, pad wear and cooling capability. This is a premium upgrade that should have come from the factory. As the Revo discs dissipate heat much more efficiently the factory pad compound works much better in real world conditions, only when you’re using the vehicle on the track would we recommend considering a different pad altogether.

KEY FEATURES

  • Left & right handed discs
  • + 5% braking surface
  • Two piece floating design
  • + 10mm larger disc
  • Larger more efficient cooling vanes

 


HEAT MANAGEMENT


Heat is an unavoidable by-product of friction. Managing this heat efficiently is extremely important in order to avoid it transferring to the pads, caliper and fluid. The OEM RS3 discs are manufactured as a single part, pumping air in different directions on each side of the vehicle. This causes varying levels of cooling efficiency and temperatures leading to judder and brake fade.


Revo DISCS


Revo discs are manufactured by Alcon and utilise over thirty years of motorsport expertise in their design and manufacture. Internal vanes are used to draw air through the centre of the disc outward, allowing the heat to transfer as it passes. The rotation of the discs and vanes play an important role in brake cooling as it acts like a pump to move air and unlike the OEM brake discs, the Revo upgrade consists of a right and left-hand disc to optimise cooling and ensure consistent stopping power for your vehicle.

 


TWO PIECE FLOATING DESIGN


Utilising a two-piece floating design allows the disc and hat to expand radially and axially as they absorb heat generated from use, avoiding the most common cause of warping and cracking seen in single-piece rotors. Due to the efficiency of this design, Revo discs last considerably longer than factory discs. The friction surface features crescent groves that increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity while minimizing the pedal pulsations normally associated with straight-slotted rotors or cracking issues common with cross-drilled rotors.

 

Courtesy of Diversion Automotive / Diversion Stores Limited