Strut Mount, Street Density, MkVII Volkswagen Golf/GTI/R & 8V/8S Audi A3/S3/RS3, TT/TTS/TTRS (MQB)
034Motorsport’s Street Density Strut Mounts for the MkVII Volkswagen Golf/GTI/Golf R & 8V/8S Audi A3/S3/RS3, TT/TTS/TTRS are manufactured from 70 durometer rubber, which is approximately 50% stiffer than stock. The rubber is also fully vulcanized to the center cups to increase the lifespan and performance of the mounts significantly. The steel strut mount bodies have also been redesigned to cope with the added stresses of spirited driving.
The result is a significant reduction in deflection of the strut mount. These mounts will also eliminate the annoying “squeaking” sound often caused by the stock strut mounts when paired with coilover suspensions. Street Density Strut Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin.
We’re proud to announce the availability of the Density Line Strut Mount for MkVII Chassis Volkswagen and 8V & 8S Chassis Audi models!
034Motorsport’s Density Line Mounts are the new standard in comfort and performance. Our mounts are redesigned with performance in mind, and manufactured from high-durometer rubber for increased performance and durability, without sacrificing comfort. Density Line Mounts are void-free and fluid-free, eliminating the slop associated with the factory mounts.
Street Density:
The Street Density Strut Mount is manufactured from 70 durometer rubber, which is approximately 50% stiffer than stock. The rubber is also fully vulcanized to the center cups to increase the lifespan and performance of the mounts significantly.
The steel strut mount bodies have also been redesigned to cope with the added stresses of spirited driving.
The result is a significant reduction in deflection of the strut mount. These mounts will also eliminate the annoying “squeaking” sound often caused by the stock strut mounts when paired with coilover suspensions. Street Density Strut Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.
Features:
- Manufactured from 70 Durometer Rubber
- Rubber Fully Vulcanized to Center Cups
- Eliminates “Squeaking” Sound Caused by Factory Strut Mounts
- Reduced Strut Mount Deflection
- Maintain Proper Suspension Geometry Under Load
- Improved Steering Feel & Handling
- Complete Drop-In Replacement of Factory Strut Mounts
- Priced Individually – Two Required Per Vehicle
Fitment:
- 2015 – Present Audi A3 / S3 / RS3 (8V)
- 2014 – Present Audi TT / TTS / TTRS (8S)
- 2015 – Present Volkswagen Golf / GTI / R (MkVII)
Replaces:
- 5Q0 412 331D 5Q0412331D
Warranty:
- 1 Year Limited Replacement Warranty (If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.)
High-Durometer Rubber vs. Polyurethane:
Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings.
Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for suspension bushings that apply a shear force to the bushing during articulation.
Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance and comfort.
Technical Insight:
While the redesigned Volkswagen/Audi strut mount for the MkVII and 8V/8S chassis was a great improvement over the previous generations of strut mounts, they leave much to be desired when paired with performance dampers or coilover suspensions.
Many owners experience a “squeaking” sound coming from the front strut mounts after installing performance dampers or coilover suspensions. The noise becomes noticeable when pulling out of driveways, going over speed bumps, or traveling at low speed over uneven surfaces.
This “squeaking” is caused by the low durometer rubber used in the factory strut mounts, which causes the steel center cup to move inside of the rubber mount. Our Track Density Strut Mount Pair was designed to eliminate this annoying issue, and improve the performance of the vehicle’s suspension.
Please Note: One vehicle requires 2 mounts.
Strut Mount, Street Density, MkVII Volkswagen Golf/GTI/R & 8V/8S Audi A3/S3/RS3, TT/TTS/TTRS (MQB)
034Motorsport’s Street Density Strut Mounts for the MkVII Volkswagen Golf/GTI/Golf R & 8V/8S Audi A3/S3/RS3, TT/TTS/TTRS are manufactured from 70 durometer rubber, which is approximately 50% stiffer than stock. The rubber is also fully vulcanized to the center cups to increase the lifespan and performance of the mounts significantly. The steel strut mount bodies have also been redesigned to cope with the added stresses of spirited driving.
The result is a significant reduction in deflection of the strut mount. These mounts will also eliminate the annoying “squeaking” sound often caused by the stock strut mounts when paired with coilover suspensions. Street Density Strut Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin.
We’re proud to announce the availability of the Density Line Strut Mount for MkVII Chassis Volkswagen and 8V & 8S Chassis Audi models!
034Motorsport’s Density Line Mounts are the new standard in comfort and performance. Our mounts are redesigned with performance in mind, and manufactured from high-durometer rubber for increased performance and durability, without sacrificing comfort. Density Line Mounts are void-free and fluid-free, eliminating the slop associated with the factory mounts.
Street Density:
The Street Density Strut Mount is manufactured from 70 durometer rubber, which is approximately 50% stiffer than stock. The rubber is also fully vulcanized to the center cups to increase the lifespan and performance of the mounts significantly.
The steel strut mount bodies have also been redesigned to cope with the added stresses of spirited driving.
The result is a significant reduction in deflection of the strut mount. These mounts will also eliminate the annoying “squeaking” sound often caused by the stock strut mounts when paired with coilover suspensions. Street Density Strut Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts.
Features:
- Manufactured from 70 Durometer Rubber
- Rubber Fully Vulcanized to Center Cups
- Eliminates “Squeaking” Sound Caused by Factory Strut Mounts
- Reduced Strut Mount Deflection
- Maintain Proper Suspension Geometry Under Load
- Improved Steering Feel & Handling
- Complete Drop-In Replacement of Factory Strut Mounts
- Priced Individually – Two Required Per Vehicle
Fitment:
- 2015 – Present Audi A3 / S3 / RS3 (8V)
- 2014 – Present Audi TT / TTS / TTRS (8S)
- 2015 – Present Volkswagen Golf / GTI / R (MkVII)
Replaces:
- 5Q0 412 331D 5Q0412331D
Warranty:
- 1 Year Limited Replacement Warranty (If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.)
High-Durometer Rubber vs. Polyurethane:
Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings.
Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for suspension bushings that apply a shear force to the bushing during articulation.
Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance and comfort.
Technical Insight:
While the redesigned Volkswagen/Audi strut mount for the MkVII and 8V/8S chassis was a great improvement over the previous generations of strut mounts, they leave much to be desired when paired with performance dampers or coilover suspensions.
Many owners experience a “squeaking” sound coming from the front strut mounts after installing performance dampers or coilover suspensions. The noise becomes noticeable when pulling out of driveways, going over speed bumps, or traveling at low speed over uneven surfaces.
This “squeaking” is caused by the low durometer rubber used in the factory strut mounts, which causes the steel center cup to move inside of the rubber mount. Our Track Density Strut Mount Pair was designed to eliminate this annoying issue, and improve the performance of the vehicle’s suspension.
Please Note: One vehicle requires 2 mounts.
If you need to ask a question, or simply want to know if this product fits your car, please contact us.
We would love to help!
If you need to ask a question, or simply want to know if this product fits your car, please contact us.
We would love to help!
Sign up to our rewards program, and receive 10 points, for every £1 spent here at Diversion Automotive.
Sign up to our rewards program, and receive 10 points, for every £1 spent here at Diversion Automotive.
Please see our Shipping Policy for information.
Please see our Shipping Policy for information.
To get the most out of your product, it is important to know how to care for it.
Interior parts must be cared for with non-abrasive interior cleaners.
Exterior components should be cared for with PH neutral, non abrasive cleaning products.
Our team are most happy to assist if you have any questions about the care of your product.
To get the most out of your product, it is important to know how to care for it.
Interior parts must be cared for with non-abrasive interior cleaners.
Exterior components should be cared for with PH neutral, non abrasive cleaning products.
Our team are most happy to assist if you have any questions about the care of your product.
For more information, please see our product warranty page.
For more information, please see our product warranty page.
